Taller Desabolladura y Pintura Automotriz
Paint Rectification
Watch Video-
Small Defects: Step 1
Small Defects: Step 1 (hand or machine options)
By Hand: Remove defect using 3M™ 9 Micron Abrasive Discs 260L (00127).
OR
By Machine: using 3M™ Perfect-it™ III Microfinishing 260L 76mm P1500 (00907).
OR
By Machine: using 3M™ Perfect-it™ Denibbing System (50666).
Watch Video -
Small Defects: Step 2Use 3M™ Trizact™ Fine Finishing Abrasive Discs P3000 76mm (50415) over the area to speed up polishing time.
Printable Paint Rectification Process Board
-
Large Defects: Step 1Excess defects are removed by using 3M™ 260L Fine Finishing Discs P1200/1500 (50239/50238). Use with 3M™ Hookit™ Soft Interface Pad (05774).
Printable Paint Rectification Process Board
-
Large Defects: Step 2Use 3M™ Trizact™ Microfinishing Discs P3000 150mm (50414) on a dampened panel to refine the sanding scratches. This will reduce risk of rework due to finish ‘dropping back’.
Printable Paint Rectification Process Board
What Next?
More From 3M
Getting in touch
Llámenos por teléfono
